Camera Field Of View Calculator
Calculate horizontal, vertical, and diagonal camera field of view (FOV) in degrees and scene dimensions from sensor size, focal length, and distance.
Open toolShrink Plastic Calculator
Calculate starting drawing size from target dimensions and measured linear shrinkage. Provide Target finished width, Target finished height, Measured retained linear size (%) to compute results directly in your browser. Original dimension=target/(retained percentage/100). Uses measured retained linear size, not percent lost or assumed material behavior. Inputs and results use floating-point numbers; output shows up to 12 significant digits. Rounding can occur.
Free to useNo sign-upRuns in your browser
Enter your details
Enter the inputs, then select Calculate.
Your result
Enter your details
Result will appear here
How the Shrink Plastic Calculator Works & Core Formula
The Shrink Plastic Calculator evaluates Target finished width, Target finished height, Measured retained linear size (%) in client-side JavaScript using the deterministic rule below and updates the output panel immediately without uploading data to a server.
Calculate starting drawing size from target dimensions and measured linear shrinkage.
Original dimension=target/(retained percentage/100). Uses measured retained linear size, not percent lost or assumed material behavior. Inputs and results use floating-point numbers; output shows up to 12 significant digits. Rounding can occur.
Shrink Plastic Calculator Quick Reference & Input Guide
Review the input parameters, allowed value ranges, and worked reference cases for the Shrink Plastic Calculator below before running your calculation.
| Parameter / Scenario | Default / Sample Value | Rule or Allowed Range | Output / Usage Note |
|---|---|---|---|
| Input: Target finished width | 5 | Range: 1e-09 to 1000000000.0 | Required workspace parameter |
| Input: Target finished height | 3 | Range: 1e-09 to 1000000000.0 | Required workspace parameter |
| Input: Measured retained linear size (%) | 40 | Range: 1e-09 to 100 | Required workspace parameter |
| Worked Case 1: Baseline run (Target finished width = 5) | Preloaded / test values | Calculate starting drawing size from target dimensions and measured linear shrinkage | Target finished width = 5; Target finished height = 3; Measured retained linear size (%) = 40. The displayed output is Starting width: 12.5 Starting height: 7.5 Retained linear fraction: 0.4. |
| Worked Case 2: Comparison scenario (how much does shrink plastic shrink) | Preloaded / test values | Calculate starting drawing size from target dimensions and measured linear shrinkage | Target finished width = 10; Target finished height = 8; Measured retained linear size (%) = 50. The displayed output is Starting width: 20 Starting height: 16 Retained linear fraction: 0.5. |
Step-by-Step Guide to Using the Shrink Plastic Calculator
Follow these three steps to configure Target finished width, Target finished height, Measured retained linear size (%), verify unit and boundary rules, and export your Shrink Plastic Calculator output.
Enter target finished width
Enter target finished width. Allowed range: 1e-09 to 1000000000.0.
Input and settings
Complete the other inputs
Set target finished height, measured retained linear size (%). Original dimension=target/(retained percentage/100).
Tool result
Calculate and read the output
Select Calculate to see the starting dimensions and retained fraction. Copy result copies this text; Download saves it as a TXT file.
Review the details
Practical Worked Examples for Shrink Plastic Calculator
These concrete scenarios illustrate how the Shrink Plastic Calculator processes baseline inputs, comparison checks, and boundary constraints.
Baseline run (Target finished width = 5)
Target finished width = 5; Target finished height = 3; Measured retained linear size (%) = 40. The displayed output is Starting width: 12.5 Starting height: 7.5 Retained linear fraction: 0.4.
Comparison scenario (how much does shrink plastic shrink)
Target finished width = 10; Target finished height = 8; Measured retained linear size (%) = 50. The displayed output is Starting width: 20 Starting height: 16 Retained linear fraction: 0.5.
Boundary & unit check (Shrink Plastic Calculator)
When solving for 'shrink plastic calculator', verify that Target finished width, Target finished height, Measured retained linear size (%) use consistent units and stay within the documented scope: Original dimension=target/(retained percentage/100). Uses measured retained linear size, not percent lost or assumed material behavior. Inputs and results use floating-point numbers; output shows up to 12 significant digits. Rounding can occur.
How to Read and Verify the Shrink Plastic Calculator Output
The output panel reports the exact result derived from Target finished width, Target finished height, Measured retained linear size (%) alongside any unit or formatting notes.
The result is the starting dimensions and retained fraction. Scale a target drawing using a measured linear retention percentage.
Retained percentage differs from percentage lost and does not predict a material's behavior.
Numerical output shows up to 12 significant digits. Floating-point arithmetic and display rounding can affect the last digits.
- Example input
- Target finished width = 5; Target finished height = 3; Measured retained linear size (%) = 40
- Example output
- Starting width: 12.5 Starting height: 7.5 Retained linear fraction: 0.4
Scope Limits, Accuracy Assumptions & Related Everyday Math Tools
Review these boundary constraints and validation rules before relying on the Shrink Plastic Calculator output.
Operational scope: Original dimension=target/(retained percentage/100). Uses measured retained linear size, not percent lost or assumed material behavior. Inputs and results use floating-point numbers; output shows up to 12 significant digits. Rounding can occur. Inputs that violate minimum/maximum bounds or required format rules are rejected with a clear diagnostic prompt.
Need an adjacent calculation in Everyday Math? Use the related tools linked below to chain your workflow without leaving your browser.
More free tools to try
Choose another tool for your next calculation, conversion, or text task.
Similar Triangles Calculator
Find a corresponding side using a supplied similar-triangle scale.
Open tool
Simple Interest Calculator
Find simple interest as principal × annual rate × years.
Open tool
Circle Of Confusion Calculator
Calculate optical Circle of Confusion (CoC) in mm and microns from camera sensor dimensions, print size, viewing distance, and visual acuity.
Open tool
Pottery Shrinkage Calculator
Estimate wet-clay dimension required for a supplied fired target and linear shrinkage.
Open toolFrequently Asked Questions About Shrink Plastic Calculator
Answers about using Shrink Plastic Calculator and understanding its results.
What formula or rule does the Shrink Plastic Calculator use?
The Shrink Plastic Calculator applies the rule: Calculate starting drawing size from target dimensions and measured linear shrinkage. Enter Target finished width, Target finished height, Measured retained linear size (%) into the workspace and the tool computes the exact output in your browser.
What input parameters and units are required for Shrink Plastic Calculator?
Yes. Provide Target finished width, Target finished height, Measured retained linear size (%) using the documented units and format shown in the quick reference table above. Preloaded default values let you test the workflow immediately.
What are the accuracy limits and boundary assumptions for Shrink Plastic Calculator?
Original dimension=target/(retained percentage/100). Uses measured retained linear size, not percent lost or assumed material behavior. Inputs and results use floating-point numbers; output shows up to 12 significant digits. Rounding can occur. Confirm that your inputs fall within the allowed ranges before exporting the result.
Is the Shrink Plastic Calculator free and does it keep my inputs private?
Yes. All calculations for the Shrink Plastic Calculator execute 100% locally in your browser's JavaScript runtime. No inputs or results are uploaded to any external server.
Get the starting dimensions and retained fraction
Choose another tool for your next calculation, conversion, or text task.